Battery Monitoring for Alll Type of Battery : Lead Acid or Nicked Cadmium Battery
Specifications
Supply voltage: 20-160VDC
Power consumption: Max. 5W
Power supply: universal power supply 20 – 160VDC
Working temperature range: -5ºC to +45ºC
Max. humidity: 95%, non-condensing
Mounting: DIN-rail 35mm
Max. number of cells: 60 or more
Max. voltage per cell: 0 – 160VDC
Cell input impedance : 1.04MΩ
Min. resolution of cell voltage: 3mV
Accuracy: +/- 3mV @ 25ºC
Long term stability(3 month
period):
+/- 0.1%
Limit contacts:
- Status
- Contact hysteresis:
- Max. contact load:
- Life span of contacts:
3 potential free change over contacts
Trigger criteria’s programmable in the instruments menu
Symbol on the internal display
Adjustable, factory setting is +/- 5 counts
1A resistive / 230VAC
100‘000 cycles at max. load
10‘000‘000 cycles at no load
Measurement input ripple voltage: no need to connect this signal. The signal is directly measured from the
instruments power supply connection.
Accuracy ripple current: +/- 0.3%
Measurement input current: depending on the requested maximum current, a current sense module
is supplied.
Accuracy current measurement: +/- 0.1% gain error, Offset +/- 0.1%
Accuracy ripple current measurement:
+/- 0.25% gain error, Offset+/- 0.1%
Temperature measurement: -30 … +70 ºC, with external 3-wire Pt-100 temperature sensor
Accuracy: +/- 0.1 ºC
Pt-100 sensor cable length: 1000m, automatic cable length compensation
Hydrogen concentration input: 4 … 20mA, measurement with an external hydrogen sensor
USB data logger: accepts FAT32 formatted USB-sticks
USB Anschluss: galvanically separated USB Type B connector for the connection between the Torkel or PC
Data connection to PLC / PC: RS485, termination resistors selectable by DIP switches
- Galvanically separated
- Protocol: MODBUS RTU
- Terminals for the cable shield and the connection to the next
instrument on the same bus connection
Dimensions: L x W x H = 213mm x 91mm x 62mm
Weight: 425g
CE-conformity: fulfilled
#Battery Tester - Monitoring System
